• High elasticity and wear resistance • Excellent filling properties • Good adhesion to wood • Easy to apply • Ready to use • Easy to sand
Max. layer thickness
up to 5 mm
Consumption
~1 L/m² per 1 mm layer
Drying time
1.5–20 h (at +10…+25°C, 75% humidity)
Description
Lightweight vinyl acetate-acrylate–based filler for interior use with a wide range of applications. Designed for filling joints between plasterboard sheets, treating corners, correcting surface defects, and final preparation before painting or wallpapering. Contains an antiseptic to prevent mold and fungal bacteria both during storage and after application. Easy to apply and sands well.
Surface preparation & application
The surface must be dry and clean, free of dust and dirt. Stir the filler lightly before use; if necessary, dilute with up to 3% water by volume. Apply to clean, dry surfaces. Each subsequent layer should be applied only after the previous one has completely dried. Joints must be fully dry before any decorative finishing. After drying, sand the surface using fine-grit sandpaper. Before painting, it is recommended to prime the surface using ELVI TPB–5, A–05, or another suitable primer.
Disposal
Hardened material and empty packaging should be disposed of as household waste.
WARNING! Shelf life is 18 months from the date of manufacture when stored in tightly sealed packaging at temperatures above +5°C. Wear protective goggles and a respirator when sanding. Clean tools with water after use. Keep out of reach of children!