ELVI Heat transfer fluid EKO TERMOFIT Concentrate
Product characteristics:

  • Environmentally friendly, propylene glycol–based heat transfer fluid concentrate
  • Ethylene glycol free – non-toxic and safer to use
  • Freeze protection down to –35 °C (depending on dilution)
  • Contains corrosion and scale inhibitors for extended system service life
  • Suitable for heating and cooling systems with metal and plastic components
Operating temperature
–20 °C / –25 °C / –35 °C (depending on the dilution ratio)
pH (at 20 °C)
8.2–8.5
Service life
up to 5 years
Base
propylene glycol
Product description
ELVI EKO Termofit Concentrate is an environmentally friendly, propylene glycol–based heat transfer fluid concentrate designed for heating and cooling systems in residential buildings, greenhouses, as well as commercial and industrial facilities. The product does not contain ethylene glycol, making it non-toxic and safer for both people and the environment.

The heat transfer fluid contains effective corrosion and scale inhibitors that extend the service life of heating systems and ensure stable, long-term performance. It is suitable for systems with steel, copper, aluminum, and plastic components.

ELVI EKO Termofit Concentrate is suitable for both closed and open systems and, when used correctly, provides freeze protection down to –35 °C. In a sealed system, the product service life can reach up to 5 years.
System preparation
Before filling the heating or cooling system with the heat transfer fluid, it is important to ensure that the system is clean and free of deposits, rust, or scale. A contaminated system can reduce the efficiency of the heat transfer fluid and shorten its service life.

It is recommended to flush the system with a suitable cleaning solution or clean water until all impurities are completely removed. Special attention should be paid to older heating systems where other heat transfer fluids have been used previously.
Before use, make sure that all system connections are tight and free of leaks to ensure safe and long-lasting performance of ELVI EKO Termofit Concentrate.
Application
ELVI EKO Termofit Concentrate is a concentrate that must be diluted only with demineralized or distilled water before use. The dilution ratio depends on the required level of freeze protection, such as –20 °C, –25 °C, or –35 °C.

  • –20 °C → 70% concentrate + 30% water
  • –25 °C → 75% concentrate + 25% water
  • –35 °C → 80% concentrate + 20% water

Before filling the system, the prepared mixture must be thoroughly mixed to ensure a homogeneous composition. This guarantees even protection throughout the system and optimal heat transfer performance.
The product is not intended for use in drinking water supply systems. Store in tightly closed containers at temperatures between +5 °C and +30 °C, protected from direct sunlight. Manufactured in Latvia by SIA SABĪNE-E, ensuring high quality and compliance with industry requirements.
Disposal
Hardened material and empty packaging should be disposed of as household waste.

ATTENTION!

Do not freeze. Store in tightly closed containers at a temperature from +5 °C to +30 °C, protect from direct sunlight and sources of heat.
Shelf life: 36 months from the date of manufacture (indicated on the packaging).
Contains ethylene glycol. Toxic if swallowed. Do not use in drinking water supply systems.
EUH208: Contains 2-methyl-4-isothiazolin-3-one and 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction.
Keep out of reach of children! In case of contact with eyes — rinse immediately with plenty of water and seek medical advice.
If swallowed — seek medical advice immediately and show the packaging or label.
Documentation
SDS EKO TERMOFIT Concentrate
TDS EKO TERMOFIT Concentrate
Order
Please fill out the form — we will get back to you as soon as possible.
By clicking the button, you agree to our privacy policy