ELVI Facade Base Primer
Product characteristics:

• Deeply strengthens mineral facade surfaces
• Improves adhesion of finishing materials to the substrate
• Reduces water absorption and provides hydrophobic protection
• Facilitates application of plaster and putties
• Reduces paint consumption
• Vapor permeable
• Light yellow color
Application temperature
from +5°C to +25°C
Consumption
0.10–0.25 L/m²
Drying time
3–4 hours
Solvent
water
Description
Water-based acrylic primer with excellent penetration and hydrophobic properties. Designed for priming mineral substrates such as concrete, aerated concrete, brick, and plaster before applying fillers, plasters, adhesives, or paints. Strengthens the surface, reduces water absorption and dusting, and improves adhesion to finishing materials. Vapour-permeable, alkali-resistant, and light yellow in colour. Suitable for both interior and exterior use.
Surface preparation & application
The substrate must be dry, firm, and free from dust, dirt, oil, grease, wax, and loose or flaking materials. Mechanically remove any poorly bonded or crumbly areas. Stir thoroughly before use. Apply using a brush, roller, or spray at temperatures above +5°C. Highly absorbent or weak surfaces should be primed twice — apply the second coat after the first one has partially soaked in but before it dries completely. Allow the primer to dry fully (approx. 2–6 hours depending on substrate and conditions) before proceeding with further finishing work.
Disposal
Avoid discharge into sewage systems or soil. Solidified product residues and empty packaging should be disposed of as household waste.

WARNING! Keep out of reach of children. In case of contact with eyes – rinse immediately with plenty of water and seek medical advice. Contains a mixture of biocides: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one. May cause an allergic reaction. VOC: 1.7/30/10.
Documentation
DDL FACADE BASE PRIMER
TDL FACADE BASE PRIMER