ELVI Bactericide
Product characteristics:

• Effectively destroys mold, moss, algae, and fungal infestations
• Prevents reappearance of microorganisms
• Suitable for damp areas and facades
• For primary treatment dilute 1:1 with water
• Ready to use undiluted for fungal removal
Application temperature
from +5°C to +25°C
Consumption
0.10–0.30 L/m²
Drying time
at least 24 hours before finishing works
Solvent
water
Description
Provides long-term protection of concrete and plastered surfaces against mold, algae, and other fungal infestations both indoors and on facades. Recommended for preventive treatment of walls and ceilings before painting, wallpapering, or tiling in damp areas (such as washrooms, saunas, kitchens, etc.).
Surface preparation & application
For preventive treatment, dilute BAKTERICĪDS with water in a 1:1 ratio and apply with a soft brush (or spray). To eliminate existing mold, apply undiluted BAKTERICĪDS to the affected surface and allow it to act for 1–2 hours. Then remove the contamination mechanically using a stiff nylon brush. In cases of severe fungal infestation, the procedure may be repeated. Subsequent finishing work should not be carried out earlier than 24 hours after treatment. Store and use BAKTERICĪDS at temperatures above +5°C.
Disposal
Dispose of product waste in accordance with local regulations: www.atkritumi.lv. Empty containers can be recycled after rinsing with water.

WARNING! Shelf life of BAKTERICĪDS solution is 24 months from the date of manufacture. Keep out of reach of children!
Documentation
SDS_Baktericids
TDS BAKTERICĪDS 2020