VELA FERROX is a top-quality water-based polyurethane enamel designed for the decorative and long-lasting protection of metal, wood, and mineral surfaces. This innovative and ecological product combines three functions in one (3-in-1 formula), successfully replacing a primer, anti-corrosion agent, and finish coat. Thanks to modern technology and low VOC (volatile organic compound) levels, it is ideally suited for demanding interior and exterior projects.

Featuring metallic aluminum pigments and natural mica minerals, VELA FERROX provides a striking architectural metallic effect and a natural play of light. With this enamel, it is possible to create high-end simulations of steel, titanium, bronze, graphite, aluminum, copper, and liquid metal. This opens up vast opportunities for designers and craftsmen working in loft, industrial, modern, minimal, and contemporary styles.

The product boasts exceptional performance characteristics, including high hiding power, excellent adhesion, and Class 1 abrasion resistance (in accordance with EN 13300). The polyurethane base guarantees resistance to moisture, temperature fluctuations, UV radiation, and mechanical stress. The enamel is perfectly suited for both the restoration of furniture and metal structures, and for decorative wall coatings in residential and public spaces.

Surface preparation:

General requirement for any surface—it must be completely dry, clean, and stable. Before starting work, thoroughly clean off dust, dirt, oils, grease, wax, silicone contamination, loose rust, and old, unstable coatings.

• Metal substrates: Degrease new metal and, if necessary, lightly matte it with an abrasive (P180–P240); matte and thoroughly degrease galvanized metal and aluminum; whereas metal with corrosion should be mechanically cleaned of loose rust down to a stable base and degreased.
• Wood and wood-based materials: For natural wood (moisture content not exceeding 12–15%), sand the surface (initial sanding P120–P150, finish P180–P240) and degrease resinous areas. Lightly sand and clean MDF, chipboard (DSP), OSB, and plywood; pre-matte laminated surfaces.
• Mineral substrates: Decorative plasters, concrete, and plaster surfaces must be completely dry and free from unstable particles; priming is strongly recommended in case of high absorption.

Application:

• Preparation before painting: Before use, mix the material thoroughly until a homogeneous consistency is reached and, if necessary, perform a test application.
• Climatic conditions: Apply at an air and surface temperature of +10 °C to +30 °C and a relative air humidity of <80%. Do not apply to damp surfaces if there is a risk of condensation, nor in direct sunlight or during precipitation.
• Tools: Apply with a brush, roller, spray gun, decorative sponge, spatula, or trowel.

Drying time (+23 °C; RH: 65%) - 24h, with an interval between coats of 1h.

Avoid release into water or soil. Dispose of empty packaging and hardened material as household waste.

ATTENTION! Shelf life is 24 months from the date of manufacture when stored at temperatures between +5°C and +35°C in tightly closed packaging. The date of manufacture is indicated on the packaging. Keep out of reach of children. Wash tools with water. EUH208: Contains a biocidal mixture: 1,2-benzisothiazolin-3-one and 2-methyl-4-isothiazolin-3-one. May cause an allergic skin reaction.